LA7000 All-Electric Label Applicator

LA7000 Electric Label Applicator Wipe, automatic label applicator, automatic labeler

Electric Label Applicator E-WASA Corner Wrap Application, automatic label applicator, automated labeler

Electric Label Applicator E-WASA Corner Wrap Application, automated labeler, automatic label applicator

Electric Label Applicator E-WASA Corner Wrap Application, product labeling, automatic product labeling, automated label applicator

Electric Label Applicator E-WASA Corner Wrap Application - Front and Side

Electric Label Applicator E-WASA Corner Wrap Application - Front and Top

‹ ›

The LA7000 label applicator runs all-electric -- without the need for unreliable plant air. Simplify system adjustments and compile status feedback with remote access to your entire fleet of labelers. Reliably wipe or tamp apply labels in various applications including to the side, top, bottom, front, rear and corner-wrap of product, case and pallet panels.

KEY FEATURES

Intuitive 7" responsive touchscreen with diagnostic reporting
Accurate label placement, dispensing and control with brushless DC servo motors
Smart sensing technology detects missing labels at the peel point, advancing the web past missing label area to prevent double feeds and missed products
Remotely adjust system settings and view system statuses away from the line
Reliable back and forth labeler communication enables redundant systems to switch on and take over when a production issue halts operation of a main labeler
Control settings away from the line with the handheld controller for when the labeler's orientation doesn't allow for close-up interventions
Configurable applicator modules including Wipe, E-Tamp, E-Tamp/Blow, E-FASA, E-WASA, and High Speed Tamp (HST)

Specifications
Dimensions	31” (787 mm) L x 27” (686 mm) H x 26” (660 mm) D
Certifications	IEC 61000-6-2 2005/AC:2005 Immunity, IEC 61000-6-4 2007/A1: 2011 Emission, FCC Part 15b, CSA CAN/CSA-C22.2 No. 62368-1:2014, UL62368-1:2014
Supply Roll Capacity	14” (355.6 mm) OD
Core Diameter	3” (76.2 mm) ID
Label Length	1” (25.4 mm) Min. to 22” (558.8 mm) Max.
Label Width	NARROW: 0.5” (12.7 mm) Min. to 6” (152.4 mm) Max.
	NARROW: 0.5” (12.7 mm) Min. to 6” (152.4 mm) Max.
	WIDE: 0.5” (12.7 mm) Min. to 9” (228.6 mm) Max.
Temperature	41°F - 104°F (5°C - 40°C)
Humidity	10 to 85% Relative Humidity, Non-Condensing
Weight
E-Tamp	98 lbs (44.5 kg) (includes yoke, no stand)
E-WASA	98 lbs (44.5 kg) (includes yoke, no stand)
E-FASA	101 lbs (45.8 kg)
Chi-Stand	83 lbs (37.6 kg)
High Speed Tamp	98 lbs (44.5 kg) (includes yoke, no stand)
Accuracy
Wipe	±0.06” (±1.6 mm)
E-Tamp	±0.06” (±1.6 mm)
E-WASA	±0.06” (±1.6 mm)
E-FASA	±0.06” (±1.6 mm)
E-Tamp Blow	±0.09” (±2.4 mm)
High Speed Tamp	±0.09” (±2.4 mm)
Product Rate
Wipe	800 PPM Max.
E-Tamp	120 PPM Max.
E-Tamp Blow	55 PPM Max.
E-FASA	Single Apply: 52 PPM Max. Dual Apply: 28 PPM Max.
E-WASA	Dependent on label length, print speed and product spacing
High Speed Tamp	Application dependent
Line Speed
Wipe	300 FPM Max.
E-Tamp	150 FPM Max.
E-Tamp Blow	150 FPM Max.
E-FASA	75 FPM Max.
E-WASA	125 FPM Max.
High Speed Tamp	300+ FPM Max.

LA7000 Literature

PDF

Diagraph LA7000 All-Electric Label Applicator Datasheet

12/3/2020

2.1 MB