PA6000E Print and Apply Labeler
Create Config
Edit Name Description Configiration Type Type

PA6000E Print & Apply Labeler

The Platinum E-Series PA6000E system controls labels throughout travel with an industrial strength vacuum fan attached to the tamp pad, made possible by an all-electric servo driven actuator. This fully electric system allows manufacturers to save up to 50% on energy costs without compromising on performance.

 

The PA6000E’s smart technology detects irregularities in operation through the use of strategically integrated sensors that allow it to print on-demand, track printer and tamp counts, detect cycle errors and broken liners, confirm that the tamp has returned to the home position, anticipate the precise location of the product and track the printer’s status. All of this is graphically communicated to the operator through an easy to use graphic animated touchscreen while the system is in operation.

 

The system can reliably print and apply labels to the side, top, bottom and corner-wrap of primary product, case and pallet substrate panels.

KEY FEATURES

  • User Interface -- Full Color 480x272 Graphic Touchscreen changes orientation based on system installation
  • SMART! -- Next generation intelligence to detect irregularities in operation, comprehensive informational screens, and firmware upgradeable to support future features
  • On Board Label Formats -- Recall stored formats from the User Interface via the internal microSD card or USB Thumb Drive
  • Serial RS232 and Wired Ethernet -- Built-in Status and Setting Web Pages
  • Designed for Industrial Use-- Inputs and Outputs protected against ESD, short-circuits, mis-connections, and power surges/sags
  • Product Detector -- Retro-reflective 900 mm range-adjustable sensor
  • Application Modules:
    • Tamp Module – (E-TAMP) - 5", 10", 15", 20", or 30" square-rod, high-speed actuator
    • Corner Wrap Module – (E-WASA) - 4" to 6" wide, label lengths from 6" to 13"
    • Swing Arm – (E-FASA) - 5",10", or 20" effective reach, applies one or two labels on front, side, and/or rear product panels
  • On-Demand Print -- Print when triggered to avoid label adhesive drying or dust contamination
  • Diagnostics -- Watch all of the sensors and outputs from one graphic animated screen - even while in operation!
  • Real-Time Information -- Status, Printer and Tamp counters, Repeat Cycle Error Monitor, Broken Liner, Home Position Sensor, Printer Status Monitor
  • Pallet Labeling Solutions:
    • Multiple configurations to handle multiple panels in networked and stand-alone operations
    • Verification through scanner
    • Integration to ERP and WMS databases

OPTIONAL FEATURES

  • Warning Tower -- 3-color LED status indicators
  • Variable Stroke -- Tamp-pad-mounted sensor to detect impending product contact for variable product height/width and soft contact applications
  • Discrete I/O Module -- Optically-isolated four (4) input, six (6) output module with programmable delays and logic
  • Label Present -- Monitor label on tamp for repeat errors or reprint labels
  • Label Low -- Monitor supply roll for low condition
  • Touch Pro allows you to run NiceLabel, EasyLabel or any other labeling program designed to run on a Windows 10
  • Compact Environmental Enclosure Lid (CEEL) protects the label roll from dust and particles with positive air flow
  • Integrate the SICK Lector 631 barcode scanner into your material handling process for easy code verification
  PA6000E Tamp
Print Method Thermal Transfer or Direct Thermal
Print Engine SATO, Zebra, Datamax
Print Speed Up to 16” per second
Max. Application Speed 120 PPM / 300 FPM
Print Resolution 203/300/400/600 dpi
Max. Print Area 6.6” W × 14” L
Supply Roll Capacity 14” OD on 3” core (16” optional)
Max. Ribbon Length 1970’ (600m)
Power Requirements 100-240 VAC, 47-63 Hz, 3-6A Auto-Ranging
Environmental

41-104° F (5-40° C); 15-85% RH Non-Condensing

SATO: 5-85% RH, Non-Condensing

Zebra: 20-95% RH, Non-Condensing

Dimensions 31” W × 26” D × 27” H (787 mm W × 660 mm D × 686 mm H)
Weight 120 lbs. applicator, printer, yoke, with stand
Certifications CE, CSA, ETL (UL 60950), complies with FCC, part 15 Class A




Request a Quote button

Request a Demo button

Leasing Options

New Equipment Sale phone number