| Print Area |
2" x 3" |
| Print head dot density |
12 dots/mm (300 dpi) both horizontally and vertically |
| Memory |
Printer: 200 kb standard
Extended memory with USB
One set JDS (Jaguar Design Software) included (computer not included)
Hardware and Software minimum requirements. Pentium processor, 64MB RAM, windows ‘98 or later, at least one (1) parallel and one (1) serial port
|
| Output Criteria |
|
| Print area IM |
+/- 1/32" length and print location with 1.00" length, 1.00 second dwell at a speed of 44 prints per minute.
Different settings such as length, dwell, image size, or speed will affect the consistency of these specifications. Small variations are normal due to differences in material, tension, friction, sleeve diameter, etc.
|
| Output Signals |
Out of material sensor, broken ribbon, cassette open. (Optional alarm light available.) |
| Standard Utilities |
Electrical: 110/220/240V 50/60 Hz 400W
Air supply: 30-80 PSI
|
| Cut length |
.02" (Min) to 9,999.99" Maximum |
| Length increments |
.01" |
| Amount |
1 to 999,999 |
| Cutting width |
4.0" (101.6mm) Maximum |
| Cutting Diameter |
1.0" (25.4) Max. (Material Dependant) |
| Short exit chute |
For 3.0" lengths and shorter |
| Voltage |
85 to 264 VAC, 47 to 63 Hz, 3 Amp (auto switching) |
| Air Supply |
80 to 100 PSI / 5.4—6.8 Bar (lubricated air supply) |
| Dimensions |
13.75" W x 11" H x 20.5" D (excludes exit chute) |
| Dimensions control unit (HxWxD) |
5.6" x 8" x 7.8" |
| Weight |
64 Lbs. / 29 Kg |